Vacuubrand BVC 21 User Manual download pdf (Page 22)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check

carefully the validity of this document with respect to his product. Manual-no.: 999054 / 15/12/2009

page 22 of 27

Assembling of components

Remove the blind cap. Remove screw cap from bottle.

Insert lead-through (2) with coupling (1) (Attention: Parts are

sealed with adhesive for leak tightness) and with seal ring (3) to

screw cap and assemble hose (5) under the screw cap with

locknut (4). Adjust hose towards flask wall.

Assemble screw cap.

Ensure that there is no liquid in the tube, risk of contamination!

Remove connecting tube from the filter. Remove the filter from

the piece of tube at the hose nozzle. Assemble new filter (posi-

tion with the printed side towards the bottle) and assemble con-

necting tube.

Ensure that there is no liquid in the tube, risk of contamination!

Remove adapter from the fixing clip. While pressing the control

button, pull out the aspiration tube.

Assembling new aspiration tube:

While pressing the control button, insert the new aspiration tube

between thumb wheel and roller. Insert adapter into the aspira-

tion tube. Support the fixing clip suitably and assemble the

adapter to the fixing clip.

Replacing the aspiration tube at the VHC:

filter

Replacing the filter:

blind cap

Assembling the connection set VHC:

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

No comments

Vacuubrand BVC 21 User Manual Page 22