Vacuubrand PC 620 NT User Manual download pdf (Page 22)

page 22 of 63

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully

the validity of this document with respect to his product. Manual-no.: 999188 / 19/05/2009

Vacuum Controller CVC 3000

After switching on the device the version number of the software is displayed, then the preselected

function with the pressure reading.

Attention: Do not cant when assembling or removing plug connections! Comply with correct

orientation of the plug. To connect further components use Y-adapters and extension cables

VACUU•BUS. When connecting an external pressure transducer, it is used automatically. Further

information on how to use several sensors simultaneously is available on request.

When switching on the controller CVC 3000 for the very rst time, a menu to select the language of the

controller menu is displayed. Select the desired language e.g., ”English” by turning the selection knob

and press to conrm. Then select the pressure unit (”mbar”, ”Torr” or” hPa”) in the same way.

It is possible to access the language selection menu at any time by switching on the controller

while keeping the selection knob pressed.

Keys

Start or Stop of the control

Venting:

• Short pressing vents short-time, control continues.

• Pressing longer than 2 seconds vents the system to

atmospheric pressure, control stops.

• Selecting menu „function“

• Temporary switching during operation to other functions

Selection knob

• Press to reach the set-up menu of the function

• Turn to reach the parameter set-up

• Press to reach the set value

• Turn to change the set value

• Press to conrm and to reach further parameters or to leave the set-up menu

on/off switch

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 62 63

No comments

Vacuubrand PC 620 NT User Manual Page 22